让diy的群辉更安静，更省电：群晖CPU频率动态调整。

火力压制 · 发表于 2013-12-19 11:07:15

好好学习一下

topguy · 发表于 2013-12-19 11:11:23

很高深，，，学习了

AXN5 · 发表于 2013-12-20 16:53:45

我的是1037U，完全照著操作就可以了，中間記得要重啟一次。
多謝神人。
如果可以在DSM的系統資訊顯示CPU目前的時脈就更好了。。。

下面是操作結果提供參考：

/usr/syno/etc/rc.d$ cpufreq-info
cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1
  CPUs which need to have their frequency coordinated by software: 0
  maximum transition latency: 10.0 us.
  hardware limits: 800 MHz - 1.80 GHz
  available frequency steps: 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
  available cpufreq governors: conservative, powersave, performance, ondemand, userspace
  current policy: frequency should be within 800 MHz and 1.80 GHz.
               The governor "ondemand" may decide which speed to use
               within this range.
  current CPU frequency is 800 MHz (asserted by call to hardware).
  cpufreq stats: 1.80 GHz:44.77%, 1.70 GHz:0.00%, 1.60 GHz:0.13%, 1.50 GHz:0.03%, 1.40 GHz:0.00%, 1.30 GHz:0.03%, 1.20 GHz:0.05%, 1.10 GHz:0.13%, 1000 MHz:0.13%, 900 MHz:0.11%, 800 MHz:54.61%  (76)
analyzing CPU 1:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0 1
  CPUs which need to have their frequency coordinated by software: 1
  maximum transition latency: 10.0 us.
  hardware limits: 800 MHz - 1.80 GHz
  available frequency steps: 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
  available cpufreq governors: conservative, powersave, performance, ondemand, userspace
  current policy: frequency should be within 800 MHz and 1.80 GHz.
               The governor "ondemand" may decide which speed to use
               within this range.
  current CPU frequency is 800 MHz (asserted by call to hardware).
  cpufreq stats: 1.80 GHz:47.59%, 1.70 GHz:0.03%, 1.60 GHz:0.67%, 1.50 GHz:0.00%, 1.40 GHz:0.13%, 1.30 GHz:0.00%, 1.20 GHz:0.59%, 1.10 GHz:0.24%, 1000 MHz:0.00%, 900 MHz:0.00%, 800 MHz:50.74%  (70)

zhqchang · 发表于 2013-12-21 14:29:51

学习，学习，学习，学习，

hawie · 发表于 2013-12-21 15:12:18

这个必须的。。。。。。。

hawie · 发表于 2013-12-21 17:47:09

可惜不支持E350

ImRuYi · 发表于 2013-12-21 18:23:51

学习了，谢谢！

MYPCHUT · 发表于 2013-12-21 22:58:50

谢谢分享。

linuxsn · 发表于 2013-12-23 07:17:55

怎么做呢，来看看

laoniu100 · 发表于 2013-12-23 08:46:59

这个厉害，学习了

hongmy · 发表于 2013-12-23 09:09:46

关注ing。。。。

nikio · 发表于 2013-12-23 10:40:58

e 这个可以y0u

hmilyzhang · 发表于 2013-12-23 11:13:18

学习一下~~~~~~

pbfly · 发表于 2013-12-23 11:52:47

学习一下。。。。。。。。。。。

ffert · 发表于 2013-12-23 12:43:48

学习啦

yun1990314 · 发表于 2013-12-23 12:48:31

看看卡

yun1990314 · 发表于 2013-12-23 12:48:50

看看卡

mu228 · 发表于 2013-12-23 13:08:16

怎么看动态？

laoniu100 · 发表于 2013-12-23 14:35:06

不会linux，还差那个开机自动运行不会弄

luojia2114 · 发表于 2013-12-23 15:28:01

改天在电脑上试一下，感谢分享

账号		自动登录	找回密码
密码			立即注册

[教程] 让diy的群辉更安静，更省电：群晖CPU频率动态调整。

您看了很久哦，登陆下吧！