巴法禄 Buffalo LinkStation 1.68 版固件更新 [2013.11.19]
本帖最后由 renda 于 2013-11-21 04:44 编辑更新内容
Version 1.68
- 修复“设置”中的若干安全隐患
- 增加对4K扇区大小的硬盘的支持
- 改善LS-WXBL型号的性能
- 修复在线更新服务器无响应时固件更新挂起的问题
- 修复WebAccess Remote选项可能显示不了的缺陷
- 修复LS-SL系列的LINK/ACT指示灯不正确地亮起的缺陷
- 完成RAID重建后，重建完成的信息现已能正确清除并不再重复出现。
下载链接：
http://buffalo.jp/php/ldl_ap.php?to=secure%2Fnas%2Fwin%2Fls_series-168.zip%3Fkey%3DMzEyNzEwMDQwNjQxMTc4NzEwMTAwMjJkcml2ZXIuYXNpYS5idWZmYWxvLmpwMDQyL2J1Zi1kcnYyL3NlY3VyZS9uYXMvd2luL2xzX3Nlcmllcy0xNjguemlwMTAxMDAwMmlkMTExMHJrcGF3MDAwMDAwMDYwMDA0MzQ4Mg%3D%3D%26ext%3D.zip
[点此下载]
注意：更新后若需SSH，请重新使用 acp_commander 修改 root 密码。
英文版更新说明
Version 1.68
File ls_series-168.zip
Size 284,577,224 Bytes
Date November 19, 2013
Platform Windows PC
OS Windows 2000, Windows XP, Vista, Windows 7, Windows 8
Models LS-XHL,LS-CHL,LS-WXL,LS-WSXL,LS-SL,LS-AVL,LS-VL,LS-WVL,LS-QVL,LS-XL,LS-YL,LS-WXBL Series
Copyright Buffalo Inc.
Distribution ZIP archive by WinRAR
Condition Re-distribution is not allowed.
Manuals Quick Setup Guide, Reference Guide
This product uses GPL/LGPL applicable software. You are welcome to have, modify, and redistribute the source code. Please ask our technical support about modified GPL and applicable modules. Note:You may be charged for shipping and handling.
This software updates theLinkStation firmware to version 1.68. If your firmware is already version 1.68 or later, you do not need this update.
Note: if your LinkStation is in EM mode, this firmware update might recover it.
Select your LinkStation from the NAS Navigator2 windows. The firmware version is displayed in the bottom right corner of the screen. If the name is in the form LS-***-EM***, the LinkStation is in EM (emergency) mode.
- Please consult your tech support or local representative if the firmware update produces unexpected problems.
- Do not turn the unit off until the update is finished. The update takes several minutes.
- Newer LinkStation firmwares (after version 1.51)may cause the following message to appear in NAS Navigator2:
"152:Unknown error occurred"
If this message appears, update NAS Navigator2 to the latest version.
1. Download the firmware update file.
2. Double-click the downloaded file to extract it.
3. Refer to the instructions, which will open automatically.
Version 1.68
- Fixed some vulnerabilities in Settings.
- Hard drives with 4 Kbyte sectors are now supported.
- Improved LS-WXBL performance.
- Fixed the firmware update hangup when the online update server didn't respond.
- Fixed the bug where WebAccess Remote options might not be displayed.
- Fixed the bug where the LS-SL's LINK/ACT LEDs didn't light correctly.
- When a RAID rebuild is done, the completion message now clears correctly and does not reappear.
感謝分享 感謝分享
页:
[1]